Yangzhong Shenzhou Chemical Power Equipment Co., Ltd.

Specializing in the R&D, design, production, and sales of far-infrared reactor electric heating devices.

24-Hour Hotline：

137-0529-9955

Home

|

About Us

|

Product Center

|

Container Adaptation

|

Export Services

|

News Center

|

Contact Us

|

News

How to carry out daily maintenance and upkeep of the far-infrared reactor?

Browse number: ...
Release time: 2026-10-23

As we all know, all mechanical equipment requires proper maintenance and upkeep to extend its service life and deliver long-term benefits. So how should we conduct daily maintenance and upkeep for the far-infrared reactor? Let’s take a look.

Pay attention to explosion protection during reactor installation. Multiple reactor units shall be separated to ensure adequate ventilation.
Select the correct grade of thermal oil; moisture must not be mixed into the oil.
After the reactor is installed, perform a pressure holding test with nitrogen. Operation can only commence after confirming no leakage. If leakage is detected, use soap solution to locate leaks at nozzles and pipelines. Vent the gas, tighten the connections, and carry out the nitrogen pressure holding test again.
Do not adjust the metal rupture disc arbitrarily. The metal rupture disc must be replaced once it bursts. When replacing it, ensure the convex side of the rupture disc faces upward.
Regularly inspect the safety valves, distillation ports, electric heating rods, pressure gauges and electrical instruments on the jacket, kettle cover and other parts. Repair any faults promptly once found.

Therefore, proper daily maintenance and upkeep of the reactor is of vital importance.

url: https://cnszhg.com/en/news/204.html

Keywords: