News

Introduction and Working Principle of Reactor Heater

  • Browse number: ...
  • Release time: 2026-10-23
The vessel of the reactor heater is of double-layer structure. Electric heating rods are installed inside the jacket, and high-temperature thermal oil is filled into the jacket.
 
During operation, connect the power supply first. The electric heating rods generate heat to raise the temperature of the high-temperature thermal oil. The thermal oil then transfers heat to the inner cylinder of the reactor heater, so as to heat the materials inside the reactor.
An expansion tank must be equipped for the reactor heater. After high-temperature thermal oil is added into the jacket and heated by electric heating elements, thermal expansion and contraction will occur. Without an expansion tank, the expanded thermal oil has nowhere to go and will overflow, causing hazards. The opening of the expansion tank must never be blocked; otherwise, the expanded thermal oil may deform the inner cylinder. If an expansion tank is not available, a high-temperature resistant pipe can be connected from the expansion tank interface to a stainless steel storage tank to prevent spilled thermal oil from spreading everywhere.
Reactor heaters are electric heating devices widely used in pharmaceuticals, building materials, pigment, epoxy resin, coating, food and other industries.
They feature rapid temperature rise, high temperature resistance, corrosion resistance, sanitation, no environmental pollution, no need for a heating furnace, automatic temperature rise and easy operation. They are matched with an intelligent automatic temperature control cabinet.
The flameproof electric heating type for reactors can be used in Zone 2 hazardous areas in factories, with an explosion protection rating of ExdⅡCT1~T4.
url: https://cnszhg.com/en/news/200.html
Can't find any content

Address: No. 285 Xinzhilu, Xinba Town, Yangzhong City

General Manager: Wang Jizhong (13705299955)

Marketing Department I: 0511-88412740

Marketing Department I: 0511-88412740

R&D Department: 0511-88417078

After-sales Service Department: 0511-88401595

Fax: 0511-88411595

Postcode: 212211

E-mail:737899272@qq.com